Veneered HDF (HDF is used to avoid cracking/warping)
Door Center:
Veneered HDF (HDF is used to avoid cracking/warping)
Drawer Glides:
Undermount, Full Extension, Soft Close Glides
Hinges:
6-way Adjustable, Concealed, European Soft Close Hinges
Drawer Box:
5/8" solid hardwood, dovetailed drawer box, 5/16" Plywood Drawer Box Bottom, 5-Piece drawer front construction
Shipping time
Ready to Assemble products leave the warehouse within 3-10 business days from the receipt of the order. The standard time of the order in transit is 2-5 business days. Due to the high demand, certain products in this cabinet line can be out of stock. Contact us if you would like to check stock availability before placing the order.
UV coating paint / Sherwin Williams / Code: BGI-YC.
Door and drawer profile
Recessed panel.
Wood species
Birch.
Sides color
Matches cabinet front, no skins required.
Overlay
Full overlay.
Drawer slides
Soft closing, under mount, full extension, 6 way adjustable.
Door hinges
Concealed european style hinges with soft close feature.
Interior color
UV coated natural interiors. Glass door ''GD'' cabinets have interiors that are painted or stained to match the exterior.
Toe kick color
Matches cabinet front.
Particle board
No particle board is used in this cabinet line construction.
Doors and drawer fronts
Solid birch door frame with veneered HDF (High Density Fiberboard) center panel.
Side, top, and bottom panels
1/2" thick furniture grade plywood with wood veneer. Side, top, and bottom panels are dadoed into the face frame.
Back panel
1/2" thick furniture grade plywood with wood veneer, full height, solid. Back panel is dadoed into side panels.
Installation rail
None.
Face frame
1-3/4" wide x 3/4" thick solid wood.
Drawer box
4-sided drawer boxes constructed from 5/8" thick solid hardwood featuring dovetail joints and a fully captured, 3/8" thick plywood floor.
Shelves
3/4'' plywood shelf with front edge banding.
Shelf pins
Metal Shelf Pins.
Toe kick thickness
1/2" thick.
Base corner supports
Wood corner braces.
Center stile
No center stile on wall and base cabinets up to 42" wide.
Door and drawer stoppers
Clear rubber bumpers.
Hinge side
Hinges on single door wall and base cabinets are located on the right side by default. In most cases they can be reversed to the opposite side. Reversing cabinet hinge position may require pre drilling small holes.
CARB compliant
Yes. This cabinet line is 100% in compliance with CARB Phase 1 & CARB Phase 2 defined guidelines of composite wood products.
KCMA compliant
Yes, for pre-assembled cabinets.
Full Overlay Installation
Kitchen cabinets and bathroom vanities with full overlay doors/drawers come with a small clearance between doors/drawers and cabinet edges. If a cabinet should be installed next to a wall or other surface (e.g. dishwasher end panel), we recommend adding at least 1/4" additional clearance to allow doors/drawers open smoothly. The 1/4" is the minimum recommended space. However, some applications will require a bigger distance depending on hardware and other project requirements. You can use a scribe molding or wall/base fillers to fill the gaps. Generally, the additional spacing is not required in between cabinets unless they are different depth (e.g. a 12" deep wall cabinet next to a 24" deep oven cabinet).
About Specifications
Specifications are subject to change without notice. Cabinet dimensions are typically converted from the metric system to the imperial system and manufacturers will frequently round up to the nearest 1/4 inch which is within normal industry standards. Feel free to contact us with any questions about cabinet styles and specifications.
About Cabinet Diagrams and Other Graphic Marketing Materials
Product photography and illustrations have been reproduced as accurately as print and web technologies permit. To ensure the highest satisfaction, we recommend order an actual cabinet (door) sample for best color, wood grain and finish representation. You can order any door sample directly from us.
