Wall Cabinets

_{Traditional Espresso}

Features

Style:	Recessed panel
Face Frame:	1-1/2" Rails and stiles, solid wood
Door Frame:	Premium HDF (HDF is used to avoid cracking/warping)
Door Center:	Premium HDF (HDF is used to avoid cracking/warping)
Drawer Glides:	Side Mount, Epoxy/Vinyl Slides w/ Nylon Rollers*
Hinges:	6-way Adjustable, Concealed, European Soft Close Hinges
Drawer Box:	1/2" plywood, Straight*

Shipping time

Ready to Assemble products leave the warehouse within 3-10 business days from the receipt of the order. In the event that some of the products are not available, we will contact you to discuss the possibility of replacing part of the products or the possibility of waiting for the entry of all the products into the warehouse. The standard time of the order in transit is 2-5 business days.

Order Sample Free Design

Shop Cabinets Below

Specifications

Color	Espresso
Finish	Paint
Door and drawer profile	Recessed panel door / Slab drawer front
Wood species	Birch
Sides color	Matches cabinet front, no skins required
Overlay	Full overlay door / slab drawer
Drawer slides	Side Mount, 3/4 Extension, Epoxy/Vinyl Slides w/ Nylon Rollers. All drawers can be upgraded. Contact us for more details: [email protected]
Door hinges	DTC 6 Way Adjustable, Soft Close
Interior color	Espresso
Toe kick color	Natural color finish. Matching color molding sold separately
Particle board	Cabinet box made from 1/2" particle board
Doors and drawer fronts	3/4" thick Premium HDF (HDF is used to avoid cracking/warping) with wood veneer. Full overlay door (5-piece construction), slab drawer front
Side, top, and bottom panels	1/2" particle board
Back panel	3/4" thick plywood. Back panel is dadoed into side panels, picture frame recess style
Installation rail	None
Face frame	1-1/2" wide x 3/4" thick solid wood rails and stiles
Drawer box	1/2" plywood. Natural color finish
Shelves	5/8" thick plywood with wood veneer, adjustable
Shelf pins	Clear plastic
Toe kick depth w/ TK skin	3.75"
Base corner supports	3/4" plastic corner braces w/ tabs
Center stile	No center stile on wall and base cabinets up to 39" wide
Door and drawer stoppers	Clear rubber bumpers
Hinge side	Hinges on single door wall and base cabinets are located on the right side by default. In most cases they can be reversed to the opposite side. Reversing cabinet hinge position may require pre drilling small holes.
CARB compliant	Yes. This cabinet line is 100% in compliance with CARB Phase 1 & CARB Phase 2 defined guidelines of composite wood products.
KCMA compliant	Yes, for pre-assembled cabinets.

Full Overlay Installation
Kitchen cabinets and bathroom vanities with full overlay doors/drawers come with a small clearance between doors/drawers and cabinet edges. If a cabinet should be installed next to a wall or other surface (e.g. dishwasher end panel), we recommend adding at least 1/4" additional clearance to allow doors/drawers open smoothly. The 1/4" is the minimum recommended space. However, some applications will require a bigger distance depending on hardware and other project requirements. You can use a scribe molding or wall/base fillers to fill the gaps. Generally, the additional spacing is not required in between cabinets unless they are different depth (e.g. a 12" deep wall cabinet next to a 24" deep oven cabinet).

Full Overlay Installation

Kitchen cabinets and bathroom vanities with full overlay doors/drawers come with a small clearance between doors/drawers and cabinet edges. If a cabinet should be installed next to a wall or other surface (e.g. dishwasher end panel), we recommend adding at least 1/4" additional clearance to allow doors/drawers open smoothly. The 1/4" is the minimum recommended space. However, some applications will require a bigger distance depending on hardware and other project requirements. You can use a scribe molding or wall/base fillers to fill the gaps. Generally, the additional spacing is not required in between cabinets unless they are different depth (e.g. a 12" deep wall cabinet next to a 24" deep oven cabinet).

About Specifications
Specifications are subject to change without notice. Cabinet dimensions are typically converted from the metric system to the imperial system and manufacturers will frequently round up to the nearest 1/4 inch which is within normal industry standards. Feel free to contact us with any questions about cabinet styles and specifications.

About Cabinet Diagrams and Other Graphic Marketing Materials
Product photography and illustrations have been reproduced as accurately as print and web technologies permit. To ensure the highest satisfaction, we recommend order an actual cabinet (door) sample for best color, wood grain and finish representation. You can order any door sample directly from us.

Cabinet Assembly

This tab is currently under construction. Please check back later.

Matching Styles