Premium MDF with wood veneer (MDF is used to avoid cracking/warping)
Drawer Glides:
Undermount, Full Extension, Soft Close Glides
Hinges:
6-way Adjustable, Concealed, European Soft Close Hinges
Drawer Box:
5/8" thick dovetail solid wood frame, natural color finish
Shipping time
Ready to Assemble products leave the warehouse within 3-10 business days from the receipt of the order. In the event that some of the products are not available, we will contact you to discuss the possibility of replacing part of the products or the possibility of waiting for the entry of all the products into the warehouse. The standard time of the order in transit is 2-5 business days.
No center stile on wall and base cabinets up to 39" wide
Door and drawer stoppers
Clear rubber bumpers
Hinge side
Hinges on single door wall and base cabinets are located on the right side by default. In most cases they can be reversed to the opposite side. Reversing cabinet hinge position may require pre drilling small holes.
CARB compliant
Yes. This cabinet line is 100% in compliance with CARB Phase 1 & CARB Phase 2 defined guidelines of composite wood products.
KCMA compliant
Yes, for pre-assembled cabinets.
Full Overlay Installation
Kitchen cabinets and bathroom vanities with full overlay doors/drawers come with a small clearance between doors/drawers and cabinet edges. If a cabinet should be installed next to a wall or other surface (e.g. dishwasher end panel), we recommend adding at least 1/4" additional clearance to allow doors/drawers open smoothly. The 1/4" is the minimum recommended space. However, some applications will require a bigger distance depending on hardware and other project requirements. You can use a scribe molding or wall/base fillers to fill the gaps. Generally, the additional spacing is not required in between cabinets unless they are different depth (e.g. a 12" deep wall cabinet next to a 24" deep oven cabinet).
About Specifications
Specifications are subject to change without notice. Cabinet dimensions are typically converted from the metric system to the imperial system and manufacturers will frequently round up to the nearest 1/4 inch which is within normal industry standards. Feel free to contact us with any questions about cabinet styles and specifications.
About Cabinet Diagrams and Other Graphic Marketing Materials
Product photography and illustrations have been reproduced as accurately as print and web technologies permit. To ensure the highest satisfaction, we recommend order an actual cabinet (door) sample for best color, wood grain and finish representation. You can order any door sample directly from us.
